Which rapid impact compactor is better? What are the rapid impact compaction brand stores?

Before understanding which rapid impact compactor is better, let's first understand what is a rapid impact compactor? The rapid impact compaction machine is a mechanical, electronic and hydraulic integrated product. It adopts hydraulic afterburner and electronic control, which can generate impact energy of 4~150kJ kilojoules. The tamping frequency can reach 30~80 times per minute. There are three adjustable levels of low, medium and strong. The compaction frequency is divided into two different operation modes: automatic and manual, and two working modes of step and continuous compaction, which can meet various operation requirements. The rapid impact compactor is gentle and not easy to cut the flow line of the fill layer, and it is also resistant to dust and splashes. Compared with rolling technologies such as road rollers, it has a strong penetration force, and the force is relatively uniform. It is not easy to form surface induration when the foundation is processed, and its density is relatively uniform within a certain depth range.

Rapid impact compactor is a product of the new era, and its production also depends on high-level technology and knowledge. Therefore, the choice of a good rapid impact compactor manufacturer should be considered from the production technology and experience that it has mastered.

There are not many manufacturers of rapid impact compactors on the market, mainly in Tai'an, Shandong, Zhengzhou, Luoyang and other places in Henan. By checking the company's registration time and address, you can know whether it is a real manufacturer; by understanding the company's patented technology, It can be seen whether it has independent research and development capabilities; by understanding its ISO level, you can know the quality requirements of the company's products. Of course, the above method only describes how to choose a rapid impact compaction on the Internet. In fact, the most direct and effective method is to go to the factory for on-site inspection, so as to not only have an understanding of production capacity, product quality, and technical services, but also Further see the production process and strength.

Which rapid impact compactor is better? Hangshen rapid impact compactor is recommended here.

"Hangshen" is the registered trademark of Tai'an Evergrande Machinery. It is understood that the Hangshen rapid impact compactor has been updated to the sixth generation. In 2004, the rapid impact compaction equipment passed the provincial and ministerial appraisal in Beijing, and was fully promoted and applied in Guangdong Meihe Expressway that year. After the successful development of the rapid impact compactor, it successfully defeated a compactor of the world's first brand in the Chinese road construction market with outstanding features such as high efficiency and high mobility.

With the feedback of the problems in use, the rapid impact compaction equipment designed by Cao Bin (current Tai'an Hengda Mechanical Engineer) is a rapid impact compaction when the bottom plate is installed, and the pile cap is installed at the bottom of the high-speed hydraulic pile hammer to compact the first-generation rapid impact compaction. machine upgrade.

The third generation of rapid impact compaction has made progress on the basis of the second generation, in terms of ramming strength (affecting depth), productivity and reliability during continuous work, ease of operation and transition safety, and manufacturing technology. Major breakthroughs have been made in such areas. The impact strength of the third-generation tamping machine is improved, and the impact depth of the roadbed reinforcement is more than 4 meters, and the actual measurement of a certain road is 4.5 meters; the impact depth of the first- and second-generation products of the same specification and some counterfeit products is 3 meters, or even worse.

In addition, the ramming frequency is increased to more than 30 strokes per minute, and the productivity is greatly improved; when the same loader is configured, the ramming frequency of the first- and second-generation products and some counterfeit products can only reach more than ten to twenty strokes per minute. , a large amount of hydraulic energy is converted into thermal energy. Due to the small flow resistance, there is no overheating during long-term continuous operation. As long as the supporting loader is free of defects, it can work continuously for 24 hours;

Cao Bin (currently a mechanical engineer at Tai'an Hengda) introduced that at present, there are 5 patents still used in the new generation of rapid impact compaction, such as impact compactors and hydraulic hammers built into the lifting cylinder. More than ten patented technologies used in other products.